Strathmore HVAC Services

When choosing the right air conditioner for your home, what really matters is its cooling capacity, measured in British Thermal Units (BTUs), not the actual dimensions of the unit.

The BTU rating you’ll need depends on how much space you’re trying to keep cool. To give you a quick reference, here’s a table showing the approximate cooling capacity recommended for different room sizes:

Yes. If you’re installing or replacing an air conditioner, you’ll need an Air Conditioning Permit from the City to comply with Land Use Bylaws. This protects you from future issues, including when selling your home.

Key placement rules:

• Units can project up to 1.0m into the side yard.
• Must be at least 0.2m from the property line.
• If there’s no lane and you have a front/side garage, a 3.0m side setback is required to allow future driveway access.

If your current unit doesn’t meet these rules, a development permit for relaxation is needed.

The time needed for AC installation in Strathmore depends on the project:

• Replacing an old unit with a similar one: usually 4 to 8 hours.
• New system with ductwork replacement: up to 3 days or more, depending on home size and scope of work.

Factors like property size, needed modifications, and unit type can affect the timeline.

It’s a question a lot of homeowners face: is it worth fixing my AC, or should I just replace it? The right answer depends on a few key factors. Here’s what to think about:

1. Age of Your AC
Most air conditioners last about 15 to 20 years with proper care. If your unit is getting close to that age (or past it), repairs may only buy you a little time. At that point, replacing often makes more sense in the long run.

2. Energy Efficiency
Older systems usually aren’t as efficient, which can show up on your energy bills. Newer models come with higher SEER ratings (a measure of efficiency) and can help cut costs while keeping your home cooler.

3. Comfort & Humidity
A properly working AC should cool your home evenly and help manage humidity. If your system struggles with this, it could be undersized, worn out, or simply not up to the job anymore.

4. Noise Levels
If your AC sounds like a tractor every time it kicks on, that’s a sign of age and wear. Modern systems are much quieter and less intrusive.

5. Cost of Repairs
If it’s just a small fix, repairing makes sense. But if you’re facing a big-ticket repair (like a compressor failure), it may be smarter to put that money toward a brand-new, reliable system.

We’re based in Calgary and serve the Strathmore area regularly. In most cases, we can get a technician to your home or business the same day or within 24 hours, depending on the urgency and schedule.

Yes! All of our HVAC technicians are fully licensed, insured, and trained to meet Alberta’s safety and industry standards.

A high-efficiency furnace replacement in Strathmore usually costs $5,500 to $8,500, but the final price depends on:

• Home size: larger homes need larger furnaces
• Furnace type & brand: features and models affect cost
• Efficiency rating (AFUE): higher efficiency costs more upfront but saves long-term
• Installation complexity: venting, layout, or old unit removal can add costs
• Other factors: code upgrades, fuel conversions, or relocating the furnace

For an exact quote, it’s best to book an on-site evaluation with us!

When choosing a furnace for your home, focus on heating capacity (BTU) instead of just the unit’s physical size. The BTU requirement depends on your home’s size and insulation. Here’s a quick reference chart to guide you:

Most furnace installations take 4 to 8 hours, though the exact time depends on:

• Furnace type & complexity: advanced or multi-stage units take longer
• Ductwork & infrastructure: repairs or modifications can add time
• Electrical & gas adjustments: may be needed for the new unit
• Home size & heating capacity: larger homes take more time to set up

Our technicians can give a precise estimate after inspecting your home.

Common issues include ignition problems, strange noises, uneven heating, or short cycling. Whether it’s worth repairing depends on the age of your furnace, the cost of parts, and its overall efficiency. We can assess your system and recommend the best option.

Furnace repair costs in Strathmore depend on the issue: minor repairs like a thermostat or sensor replacement typically run $150 to $300, while larger repairs like a blower motor or heat exchanger can cost between $850 to $2,000.

We can provide an exact estimate after inspecting your system!

To minimize the need for furnace repairs, make these tips habits:

• Regular Maintenance: Schedule annual professional inspections to identify and address potential issues early.
• Filter Replacement: Change or clean air filters regularly to prevent airflow restrictions.
• Clear Surroundings: Keep the area around your furnace clean and unobstructed to guarantee proper ventilation.
• Prompt Attention: Address any unusual noises or performance issues immediately to prevent further damage.

By following these practices, you can extend the lifespan of your furnace and reduce the likelihood of costly repairs.

The average cost for a water heater in Strathmore is $2,400 to $3,500+, depending on:

• Type: Tank, tankless, heat pump, or solar-powered
• Brand & Features: Efficiency and additional options affect price
• Tank Size: Larger tanks cost more
• Warranty: Extended warranties may increase upfront cost
• Installation: Some quotes include installation; some don’t
• Company Choice: Experienced, reputable installers may charge more but guarantee a smooth installation

For an exact estimate, contact One Stop HVAC!

Water heater size depends on your household’s daily water use:

• 1 to 2 people: 30-40 gal
• 2 to 3 people: 40-50 gal
• 3 to 4 people: 50-60 gal
• 5+ people: 60-80 gal

Also consider the First Hour Rating (FHR) which is how much hot water the tank can produce in one hour at peak use. Typical usage estimates:

• Bath/shower: 20 gal per person
• Washing hair: 6 gal per person
• Hand washing: 2 gal per person
• Dishwasher: 14 gal
• Clothes washer: 30 gal

Use these numbers to pick a tank that meets your water needs. Our Strathmore HVAC experts can help choose the right size after checking out your needs!

It depends on your household needs:

• Tank Water Heater: Stores hot water in a tank, ideal for larger families with high simultaneous hot water use. Lower upfront cost ($600 to $2,500) but higher energy bills and shorter lifespan (8 to 12 years).
• Tankless Water Heater: Heats water on demand, saving energy and providing endless hot water. Longer lifespan (20+ years) and compact design, but higher installation cost ($1,200 to $3,500), and may need plumbing/electrical upgrades.

Yes! We provide a free estimates so you know the cost before any work begins.

Common signs include:

• Brown or rusty water, or visible rust on the tank
• Not enough hot water or inconsistent heating
• Leaks at the base of the tank
• Strange noises like popping or rumbling
• Water heater over 10 years old
• Frequent repairs or costly issues
• Sediment buildup (muddy/sandy water)

If you notice any of these, it’s best to call our Strathmore technicians as soon as possible.

Act quickly to prevent damage:

1. Locate the leak and wipe up any water.
2. Turn off power (breaker for electric, switch for gas).
3. Shut off the water supply at the tank or main valve.

Call One Stop HVAC immediately to have a professional assess and repair the problem.

Gas line installation costs in Strathmore typically range from $350 to $750 for straightforward projects, such as connecting a gas appliance like a stove or dryer. More complex installations, like running gas lines to multiple appliances or across longer distances, can exceed $1,000.

Factors influencing the cost include the length of the line, the type of appliances, and any necessary permits or inspections.

Yes! All One Stop HVAC technicians are fully licensed and insured. They hold Class A and B Gasfitter certifications, allowing them to safely install and repair residential and commercial gas lines.

We handle all required permits under Alberta’s Safety Codes Act and follow the Alberta Gas Code (B149.1-20). All work is inspected by a Safety Codes Officer to guarantee compliance, safety, and efficiency. Our team also undergoes ongoing training to stay current with best practices and safety standards.

Simple installations for smaller properties can be done in a few hours. Larger or more complex projects may take several days to guarantee safe, precise installation.

The cost of installing or replacing a commercial rooftop HVAC unit in Strathmore typically ranges from $10,000 to $45,000. This estimate includes the unit itself, installation labor, and associated equipment. Factors influencing the cost include system size, brand, energy efficiency, and any additional features or modifications required.

Determining the appropriate size for a rooftop HVAC unit involves a detailed load calculation, considering factors such as:

• Building Size and Layout: The total square footage and design of your space.
• Occupant Load: The number of people typically present.
• Insulation and Windows: Quality and quantity affecting heat gain/loss.
• Equipment Heat Load: Heat generated by machinery or appliances.
• Climate Considerations: Local weather patterns and temperature extremes.

A general guideline is to calculate the square footage of the building space, divide by 500, and multiply by 12,000 to get the approximate cooling load in BTUs. However, this method is basic and may not account for all variables!

That’s why it’s best to consult with our professional HVAC technicians.

Our rooftop HVAC installations is designed to minimize disruption. We schedule work for your business during off-hours whenever possible and coordinate carefully to reduce noise, dust, and downtime.

While some areas may experience temporary interruptions, we prioritize keeping your business running smoothly throughout the installation process!