Airdrie HVAC Services

In Airdrie, AC installation typically costs between $4,000 and $8,500, depending on factors like the type and size of the unit, energy efficiency, and whether ductwork or additional components are needed. Seasonal demand and local permits can also affect the price.

At One Stop HVAC, we help you pick the right system and provide clear pricing for a professional installation. Contact us for a personalized quote today!

When it comes to determining the appropriate size of an air conditioner for your Airdrie home, it’s essential to focus on the cooling capacity, measured in British Thermal Units (BTU), rather than just the physical size of the unit.

The cooling capacity you’ll require depends largely on the size of the area you want to cool. Here’s a table to provide you with a rough idea of the cooling capacity you’ll need based on different room sizes:

AC installation time varies: swapping an old unit for a similar one usually takes 4 to 8 hours. If new ductwork is needed, it can take up to three days.

Every job is different, but our team works efficiently to get your system up and running smoothly.

Deciding whether to repair or replace your AC depends on a few key factors:

• Age: AC units usually last 15 to 20 years. If yours is older, a new unit may save money in the long run.
• Efficiency: Older units use more energy. Upgrading to a higher SEER rating can cut bills.
• Humidity: A properly sized AC controls humidity better, keeping you comfortable.
• Noise: Noisy units can be annoying; new models run quieter.
• Repair Costs: Minor fixes are fine, but major repairs might mean it’s time to replace.

Talk to a One Stop HVAC pro to find the best choice for your home and budget.

Get your AC serviced once a year to keep it running efficiently. Regular maintenance helps catch small problems early, saving you money on big repairs. Without servicing, your AC can lose up to 5% efficiency each year, use more energy, and wear out faster, sometimes cutting its lifespan in half. Routine check-ups are a smart way to protect your comfort and your wallet.

If your AC isn’t blowing cold air, it could be due to:

• Low refrigerant: Leaks reduce cooling and raise humidity; a pro can fix this.
• Dirty filters: Change every 3 months to keep airflow smooth and parts lasting longer.
• Coil problems: Moisture or freezing can damage coils; we can repair them.
• Blocked vents: Clear registers and ducts for better airflow.
• Thermostat issues: Make sure it’s set right and working properly.

If you’re unsure, our team at One Stop HVAC can diagnose and fix the problem.

If your AC is making weird noises, here’s what they might mean:

• Banging/Clanking: Loose or broken parts inside the unit.
• Clicking: Normal at start-up; if ongoing, could be a fan or electrical issue.
• Buzzing: Loose parts or a failing fan motor.
• Squealing: Blower or air pressure problems.
• Humming: Usually minor and not anything serious, but worth checking.
• Rattling: Loose fan, debris, or worn parts.
• Whistling: Could be a refrigerant leak, call a pro right away.
• Pulsating: Normal sometimes, but loud or constant means something’s loose.
• Whirring: Possible fan motor issues, get it checked.

How often you change your AC filter depends on a few things:

• Filter type: Standard filters usually last 30 to 60 days; allergy-friendly homes may need changes every 3 weeks.
• Indoor air quality: Poor air or indoor smoking means more frequent changes.
• Pets: More pets = more frequent filter swaps, sometimes every 20 to 45 days.
• Household size: Bigger families might need to change filters more often.
• Outdoor pollution: Construction or busy roads nearby can mean changing filters every 30 to 60 days.

In Airdrie, a new high-efficiency furnace typically costs between $5,500 and $8,500. The price depends on your home size, furnace type, and efficiency, and how complex the installation is. Other factors like venting upgrades, removing the old unit, or fuel type changes can also affect cost.

For a precise estimate, schedule an on-site evaluation with One Stop HVAC.

When it comes to selecting the right furnace for your Airdrie home, it’s crucial to consider the heating capacity, measured in British Thermal Units (BTU), rather than solely focusing on the physical dimensions of the unit.

The heating capacity needed for your home depends primarily on its size and insulation. To give you a general idea of the heating capacity required for different room sizes, refer to the following table:

To make your furnace installation easy and efficient:

• Have a pro assess your home’s heating needs.
• Inspect and fix your ductwork beforehand.
• Clear a path for easy access to the furnace.
• Consider a programmable thermostat for energy savings.
• Think about adding air purification or humidifiers.
• Know that installation can take hours to a few days, and be available.
• Ask about a maintenance plan to keep your furnace running well.

Following these steps helps make sure your home stays warm and comfortable.

Thinking about repairing or replacing your furnace? Consider these:

• Age: Furnaces over 10 years often need replacement.
• Repair costs: Frequent, costly fixes may mean it’s time for a new one.
• Energy bills: Older units can waste energy and heat less efficiently.
• Air quality: Aging furnaces may affect air filtration and humidity.
• Efficiency: Newer models save money and improve comfort.

Have questions? Contact One Stop HVAC for an on-site evaluation and expert advice.

We recommend furnace maintenance every 1 to 2 years (ideally yearly) and duct cleaning every 3 to 5 years for best performance. Look out for these signs that you need service:

• Dirty vents or filters
• Yellow or orange furnace flames (can be dangerous)
• Frequent repairs or breakdowns
• Water leaking from the furnace
• Furnace turning on and off quickly (“short cycling”)
• Furnace blowing cold air
• Rising energy bills

Regular maintenance helps keep your system safe, efficient, and lasts longer.

A well-maintained furnace can last 15 to 20 years or more. Its lifespan depends on:

• Proper sizing: The right size prevents wear from too much cycling.
• Quality installation: Professional setup avoids duct and fuel line issues.
• Regular maintenance: Keeps parts clean and airflow smooth.
• Thermostat settings: Energy-efficient temps reduce stress on your furnace.

In Airdrie, water heater costs usually range from $2,400 to $3,500+, depending on:

• Type (tank, tankless, heat pump, solar)
• Brand and features
• Tank size for your household needs
• Warranty options
• Whether installation is included
• The company you choose for installation

For a precise and honest quote, contact One Stop HVAC to schedule an at-home evaluation.

Choose a water heater size based on how many people live in your home:

• 1-2 people: 30 to 40 gallons
• 2-3 people: 40 to 50 gallons
• 3-4 people: 50 to 60 gallons
• 5+ people: 60 to 80 gallons

Also consider the First Hour Rating (FHR), which shows how much hot water the tank can supply in one hour. This is important during busy times.

Estimate peak usage with these numbers per person:

• Bath or shower: 20 gallons
• Washing hair: 6 gallons
• Washing hands: 2 gallons
• Dishwasher: 14 gallons
• Clothes washer: 30 gallons

On installation day, our technician will arrive, show ID, and walk you through the work plan. Once you approve, the job begins. Replacing a water heater usually takes 2 to 3 hours: about an hour to remove the old unit, 30 minutes to position the new one, and another hour to connect and test everything.

Most installs finish in one visit, but if any issues come up, we’ll return the next day to complete the work, always aiming for a smooth, hassle-free experience.

If your hot water tank leaks, act fast:

• Find the leak and soak up water.
• Turn off power (breaker for electric, switch for gas).
• Shut off the water supply at the valve or main line.
• Call One Stop HVAC for professional help.

Don’t wait! Quick action helps prevent costly damage. We’re here to assist you anytime.

Skipping water heater flushing can cause sediment buildup, leading to pipe damage, low water pressure, and tank problems within a few years. To flush your water heater:

• Turn off power or gas and let it cool.
• Shut off water supply.
• Open a hot water faucet nearby.
• Drain the tank through the drain valve using a hose.
• Flush by refilling and draining again.
• Close the valve, refill, and restore power.

If this sounds tricky, call our team at One Stop HVAC to handle it safely and professionally.

Ignoring water heater flushing can cause warning signs like:

• Rusty or dirty hot water
• Not enough hot water
• Leaks around the tank
• Strange noises (popping or rumbling)
• Water heater over 10 years old
• Frequent costly repairs
• Sediment in your hot water

If you notice any of these, it might be time for a replacement. Contact our team at One Stop HVAC to get help before problems disrupt your comfort.

Hiring a licensed professional for your gas line installation is crucial because:

• Safety: Proper installation reduces risks and keeps your family safe.
• Efficiency: Experts optimize your system to save on energy bills.
• Durability: Professional care extends the life of your gas appliances.
• Cost Savings: Efficient systems lower your long-term costs.
• Compliance: Ensures your installation meets all safety codes and avoids fines.

For a safe and efficient gas line, trust One Stop HVAC’s licensed technicians. Contact us today to schedule your installation.

Gas line installations use approved materials to keep your home safe and meet local codes. Common materials include:

• Steel Pipes: Often used indoors and above ground, steel pipes are strong and reliable if corrosion isn’t an issue.
• Copper Pipes: Types L or K copper pipes are approved for gas systems inside buildings, providing durable, leak-proof connections.
• Yellow Brass Pipes: Sometimes allowed indoors as an alternative option.
• Aluminum Pipes: Used less often and not approved everywhere, especially not for underground lines.
• Ductile Iron: Approved in some areas for underground gas lines due to its durability.
• PVC Pipes: Suitable for underground gas lines outside buildings, thanks to corrosion resistance.
• PE Pipes: Also used underground outside, PE pipes handle environmental factors well and last long.
• Flexible Connectors: Essential for safely linking gas appliances to your gas supply, these must be approved to prevent leaks.

Using the right materials is key to a safe, compliant gas system.

Gas line installations follow strict safety measures to protect workers and prevent hazards:

• Regular Safety Training: Employees get ongoing training to stay aware and follow national safety standards.
• Safety-First Culture: Workers can stop any unsafe work to keep everyone safe.
• Careful Excavation: Pipelines are dug with proper equipment and trained operators, after marking all underground utilities.
• Personal Protective Equipment: Workers always wear safety gear like goggles, hard hats, boots, and gloves.
• Machinery Training: Operators of heavy equipment are thoroughly trained in safe procedures.
• Tool Inspections: Tools are checked regularly and fixed or replaced if worn or unsafe.
• Safe Handling: Proper techniques and mechanical aids are used to prevent injuries when moving heavy pipes.
• Pressure Testing: Pipelines are tested and operated within safe pressure limits as per manufacturer guidelines.

Commercial rooftop HVAC units free up indoor space by being installed on the roof, which is especially helpful for businesses with limited interior space. They provide efficient heating and cooling designed to handle large commercial spaces. Rooftop systems also simplify maintenance because technicians can access the units without disrupting daily operations inside the building. Plus, they often come with flexible zoning options to control temperature in different parts of the building independently.

Regular maintenance is essential to keep your rooftop HVAC system running efficiently and prevent costly breakdowns. Ideally, you should have your units inspected and serviced at least twice a year – once before the heating season and once before the cooling season. During maintenance, technicians will check refrigerant levels, clean coils and filters, inspect electrical connections, and make sure the unit’s components are functioning properly. This proactive approach can extend the system’s lifespan and improve energy efficiency.

Several factors affect how long your rooftop HVAC system will last. The quality of the equipment and professional installation are key to a durable system. Routine maintenance, such as cleaning and timely repairs, prevents premature wear and tear. Environmental factors like exposure to harsh weather conditions or corrosive elements can also impact longevity. On average, well-maintained rooftop units can last between 15 to 20 years, but neglect or extreme conditions might shorten that.

No, in Airdrie, the permitting requirements for commercial rooftop HVAC installations are generally the same as for residential HVAC systems. However, commercial projects often involve larger and more complex systems, so they may require additional inspections to ensure their compliance with safety and building codes. It’s always best to work with a licensed HVAC contractor who can guide you through the permitting process and ensure all local regulations are met smoothly.

The cost of installing a commercial rooftop HVAC system in Airdrie can vary based on several factors, including the size of the building, the complexity of the installation, and the specific requirements of the HVAC system. On average, businesses can expect to pay between $7,000 and $35,000 for a complete installation.

This estimate includes the cost of equipment, labor, and any necessary modifications to existing infrastructure.